Features of the new B2 battery pack

• Custom made padded carrying case made from 1000 denier nylon fabric
• One end of the heavy duty belt loops are attached with Velcro so you do not have to remove your belt to carry the battery pack
• Connector at end of coiled-cord can be quickly inserted in the mating connector on the SuperBright II or it can be locked to the light by turning the sleeve 1 ½ turns
• Uses a new 12VDC 8.5 Amp-Hour battery
• Will operate a SuperBright II (any model) for about 7 hours per charge
• Uses an approximately 3/10 inch diameter heavy duty 7 foot coiled-cord that is permanently attached to the carrying case (no cigarette lighter plugs and jacks to get loose)
• Coiled cord is so strongly attached to the fabric case you can carry the case and battery by the cord (although that is not recommended)
• Detachable shoulder strap can attach to itself to make a belt for the battery pack
• Weight of the battery case, shoulder strap, coiled-cord, and connector, is 6.9 lb
• Plug at end of coiled-cord is wired in parallel for redundancy and reliability
• 115AC charger mates with plug at end of the coiled cord for charging

SuperBright II and B215 auxiliary 15 ft. cord that connects to car cigarette lighter

Features of the optional auxiliary fifteen foot cord

• Heavy duty #16 AWG wire for minimal voltage drop
• Builtin 5A fuse in male plug to protect your cars battery
• Cord strain relief on both ends of the cord at each plug