(Click image to enlarge)
 SuperBright II with power supply The SuperBright II retains the features that made the original SuperBright so popular plus several additional features were added. |
(Click image to enlarge)
 |
All the lamps that can be used in the 3000 series SuperBright II, from the bottom LW350, LW370, MW, and SW
- Sturdy lightweight aluminum housing (2 lb.)
- High efficiency, high frequency, solid state ballast and U-shaped lamp (bulb)
- Instant start-up - no extra buttons to push
- Ergonomic four-way adjustable handle
- Specially selected high efficiency reflector
- The filter holder brackets have slotted "fingers" so as to not put stress on the filter
- Lamp life will be over 6000 "on-off" cycles, depending on use
- Four non-skid feet to protect the filter when the light is set down
- Four different UV wavelengths available; SW, MW, LW350 and LW370
|
|
(PDF file, 20 KB)
|
Additional features of the SuperBright II 3000 series models |
(Click image to enlarge)
 Getting ready to clip the neck lanyard to the split ring on the handle | (Click image to enlarge)
 Switcher power supply (AC Adaptor), comes with every SuperBright II |
(Click image to enlarge)
 SuperBright II with cover removed showing captive bolts at upper L and lower R |
- New ballast delivers more lamp current resulting in more UV output
- Reliable Mil-Spec. connector system which eliminates any possibility of flicker
- Custom neck lanyard allows hands-free operation
- The AC power supply (AC adapter) is smaller and lighter in weight
- The SuperBright II is now serialized so you can tell whose light is whose.
- Reflector slightly enlarger
- Only two captive bolts required to remove cover
|
 |
Additional details about the AC power supply that comes with
the SuperBright II
- The AC power supply has a green LED indicating when power is applied
- The power supply will work from 100 to 240 V and from 50 to 60 Hz
- The power supply is short circuit protected; if a short happens the supply will shut down under the short is removed
- The AC cord plugs into an IEC connector so any IEC power cord can be used with the power supply
|
|
(Click image to enlarge)
 |
(Click image to enlarge)
 |
| AC to DC Power supply showing IEC connector for the power cord |
Power cord plugged into IEC connector on power supply |
To Order:
|
|
3000 Series 
