Skip to content

Dual TripleBright 3 DFSLSS with two SW Lamps

Original price $3,495.00 - Original price $3,495.00
Original price
$3,495.00
$3,495.00 - $3,495.00
Current price $3,495.00

This Dual TripleBright 3 is specifically designed for fluorescent applications where you want maximum SW output.  The Dual TripleBright 3 comes with two SW Hoya Optics U-325C filters and two 254 nm SW lamps.

There are 13 different models of Dual TripleBright 3's available depending on which lamp and UV filter combination are used, not all models are listed on the web site. 

Specifications:

  • The Dual TripleBright 3 is specifically designed for fluorescent mineral displays with special features such as its patented circuits (US patents 6,479,947 and 6,838,837) that allows the lamps (bulbs) to be turned “on” and “off” millions and millions of times without affecting the life of that lamps.
  •  The Dual TripleBright 3 uses two 120VAC electronic ballasts that drives the lamps at about 43 KHz for more efficient lamp operation. The light has two custom designed filament transformers that heat the lamps filaments up before it is turned “on” allowing millions and millions of lamp “on-off” cycles.
  •  The Dual TripleBright 3 comes with two SW Hoya Optics U-325C filters.  The model DFSLSS uses two SW filters so if one breaks you do not have to replace both filters.  The SW Filters areitem #FS-60.  
  •  This Dual TripleBright 3 light has two SW custom designed High Output (HO) quartz lamps (LS-60- 254) that come with the light.  Both the LS-60-254 lamps have a special coating on the inside of the tubing that resists the mercury from penetrating the bulb wall.  The special coating allows for long lamp life with minimum UV reduction as the lamps age.
  •  The cover is designed so that it can be opened once it is mounted inside the display case.  Loosen the one captive bolt and the cover will swing open.  The cover is held on by slip hinges so by sliding the cover lengthwise the pins come out of the hinges and the cover can be easily removed to replace the lamps and filters if necessary.  Many other manufacturers of UV display lights have sheet metal screws that have to be removed around the periphery of the cover and you cannot get to the back of the UV light when it is mounted in a display.
  •  The large aluminum reflector is specially selected from aluminum rolls to have a high UV reflection.
  •  The Dual TripleBright 3 also has a fan to maintain the optimum lamp operating temperature for maximum UV output.
  •  The Dual TripleBright 3 dimensions are 35 3/” L x 4 ¾” W x 5 ¾” H (806mm L x 120.6mm W x 146mm H).
31 Years In Business
Highly Rated
Top Customer Support
Great For Collectors